Skip to content

Hydraulic Filters on a Concrete Pump: Types, When to Replace and How to Order

Contamination is one of the main reasons hydraulic pumps and valves fail, and the filter is the cheapest protection they have.

Published

Hydraulic filter element

What the filter does

Hydraulic oil passes through the filter, which keeps back particles of metal, dust and rubber. Those particles scratch the surfaces of the pump and valves and increase internal leakage and heat. A clean filter means clean oil and a longer pump life.

Filter types in the system

TypeWhere it sitsNote
Pressure filterAfter the pump, before the valves.Protects the valves and actuators.
Return filterOn the line returning to the tank.Catches what the circuit has collected before the oil goes back to the tank.
Suction strainerAt the pump inlet inside the tank.A blocked one starves the pump and causes noise.
Tank air filter (breather)On the tank cap.Stops dust entering with the air the tank breathes.

Signs of clogging and when to replace

  • The clogging indicator (if fitted) shows the filter's state.
  • Pump noise, slow movement or hot oil. See hydraulic oil overheating.
  • After a pump or motor failure: replace the filters and check the oil, because debris from the failure circulates in the system.
  • At the manual's interval, which is the baseline, and as part of the maintenance checklist.

How to order the right filter

  1. Read the number printed on the filter housing or label, and photograph it.
  2. Note the filtration rating if it is written. In some catalogue names it appears as in “Filter 10U”, which usually refers to the rating in microns.
  3. Send the pump make and model with the photo. Numbers in brackets in some names, such as (294073005), are the maker's reference number where we have it.
  4. Ask for the sealing O-rings with it if needed. Details in how to find the part number.

Parts from the catalogue

Related categories

Quick questions

Can I clean a filter and reuse it?

It depends on the type. Paper and glass-fibre elements are replaced, not cleaned, and some metal elements may be cleaned if the manual allows it. Follow the machine manual.

What does 10U mean in some names?

It usually refers to the filtration rating in microns. Order the filter by its full number, not by this rating alone.

Is the same filter suitable for Putzmeister and Schwing?

You cannot assume so. Numbers differ between makes, so send the number or a photo of the filter and the machine model.

Will a new filter fix a noisy pump?

Sometimes, if the cause is a blocked suction strainer or filter, but noise can also mean wear. Check the filters first because they are the cheapest.

Read next