Skip to content

How to Find the Part Number of a Concrete Pump Spare Part

The right part number saves you a wrong order and a second trip. This guide shows where to look for the number on a concrete pump, truck mixer or batching plant, and what to do if you cannot find it.

Published

Pressure transducer

Start with the machine, not the part

  • Find the data plate (the metal nameplate) on the machine. It gives the make, model and serial number. Photograph all of it, clearly.
  • Many parts differ between model years, and the serial number settles which version you have.
  • Write down the name of the part and where it sits on the machine, for example agitator bearing, S-valve, delivery cylinder or hydraulic motor.

Where the number is on the part itself

  • Bearings: the series number is printed or stamped on the side face of the ring, next to the maker's mark.
  • Hydraulic pumps and motors: a small plate on the housing carries the type code, such as A10VO28 or A4VTG90.
  • Filters: the number is on the housing or on the label.
  • Cast and steel parts such as the wear plate, cutting ring and elbows: there may be a stamped number. If it has worn off, we go by the dimensions or the machine's parts book.

If there is no number, measure the part

  • O-rings and seals: inner diameter × cross-section in millimetres. For example, “O Ring 235X5” means 235 mm inside diameter and 5 mm thick.
  • Cutting ring, piston and delivery cylinder: the nominal diameter (such as DN 230) and the length (such as a 230×2100 cylinder).
  • Delivery pipes, elbows and hoses: the nominal size or inches (such as 6"), the wall thickness, the length and the coupling type.

Our catalogue code and the OEM reference number

Every part on our site has our own code (such as 201010-064) and, where we have it, the OEM reference number of the machine maker. The catalogue search box accepts either one, or the name.

What to send us on WhatsApp

  1. A photo of the machine's data plate.
  2. Two photos of the old part from different angles, showing any numbers on it.
  3. The machine's make, model and year.
  4. The dimensions you measured, if you have them.
  5. The quantity and the city you want it delivered to.

Send them on WhatsApp at +966 59 211 2782 and we identify the right part and reply with the price and availability.

Parts from the catalogue

Related categories

Quick questions

I do not have the part number. How do I order?

Photograph the machine's data plate and the old part and send them on WhatsApp. We identify the right part for you.

What is the difference between your code and the OEM reference number?

The catalogue code is our own number for each part. The OEM reference number is the machine maker's number, shown where we have it.

Read next