Skip to content

Concrete Pump Maintenance Checklist: After Every Pour, Daily and Periodic Checks

Most expensive breakdowns start with a small neglect: concrete setting in the hopper, a filter not changed, or dirty water in the water box. This is a list to print and hang in the workshop.

Published

Hydraulic cylinder seal kit

After every pour

  • Wash the hopper, agitator and delivery line thoroughly before the concrete sets, because hardened residue damages parts.
  • Check the water box: is it clean? Grey water can mean worn piston seals.
  • Look for slurry leaking at the spectacle plate and cutting ring, and for any oil leak.
  • Inspect the end hose, couplings, bolts and pins.

Before starting each day

  • Hydraulic oil level and condition (colour and smell).
  • Water box level and cleanliness.
  • Grease points, and the central lubrication system if fitted, as the manual says.
  • Oil cooler fins and fan: clean and turning?
  • Hoses and fittings: no leaks or cracks.
  • Safety devices and stop buttons work.

Periodically, as the manual says

ItemWhat to checkIn the catalogue
Hydraulic filtersThe clogging indicator, and replacement on schedule. See hydraulic filters.Filters
Spectacle plate and cutting ringGrooves and leaks. See the signs of wear.Wear parts
Piston and cylinder sealsLeaks or dirty water in the water box.Seals
Agitator bearings and paddlesPlay, noise or worn paddles.Bearings and mixer parts
Delivery pipes and elbowsWall thinning and cracks. See delivery pipes.Pipes
Electrics and sensorsConnectors, limit switches and the battery.Electrical

Spares worth keeping in the workshop

The small parts that stop a pump on site: hydraulic filters, seal kits, solenoid coils, limit switches and hoses. An inexpensive part on the workshop shelf beats a day lost on site. Ask us about a part by number or photo as in how to order.

This list is general. The interval figures (operating hours for oil and filter changes) differ between makes and models, and the reference is your machine maker's manual.

Parts from the catalogue

Related categories

Quick questions

How often should I change the hydraulic filters?

As the interval in the machine manual says, or when the clogging indicator shows it. The interval differs by model, so we do not give one general figure.

Why wash the pump straight after pumping?

Because concrete that sets inside the hopper, pipes and valve damages parts and makes the next start harder.

Which spare parts matter most?

Filters, seal kits, solenoid coils, limit switches and hoses, because they are small and stop the pump when they fail.

Is lubrication needed every day?

As the machine manual says. Some machines have central lubrication and some have manual points, so follow the maker's schedule.

Read next