Skip to content

Concrete Batching Plant Spare Parts: What Wears Out and How to Order

A batching plant works in dust and cement, so some of its parts wear by design. This guide lists them and points you to the right catalogue sections.

Published

Concrete batching plant

Where a plant wears

Area of the plantWhat wears or failsIn the catalogue
The mixerArms, blades and liners, because the aggregate rubs against them.Mixer and batching-plant parts and Sicoma
Belts and conveyorsBelts, rollers, idlers and chains.Chains, belts and rollers
WeighingLoad cells and their cables.Electrical, meters and controls
Cement, water and airButterfly valves and actuators.Valves and actuators
Silos and hoppersVibrators that stop discharge blockages.Industrial vibrators and OLI
Drives and controlsBearings, gears and limit switches.Bearings and gears

What you need to order a plant part

  • The plant or mixer make, model and year, from the data plate.
  • The part name and where it sits, and two photos from different angles.
  • For electric vibrators: a photo of the motor plate (voltage, power and speed), because the part is matched by it.
  • For belts and rollers: width, length and the size in millimetres.

The detailed steps are in how to find the part number.

Preventive checks on a plant

  • Inspect belts and rollers for wear or misalignment.
  • Check weighing accuracy against known weights as the plant's procedure says, because a drifting load cell gives a wrong mix.
  • Check the vibrators' mounting, bolts and cables.
  • Wash the mixer thoroughly after use so concrete does not set.

Not every plant part is shown with a photo in the catalogue. If you do not find yours, send a photo on WhatsApp and we reply with what is available, as in how to order.

Related categories

Quick questions

Which plant parts wear the most?

The mixer's arms, blades and liners, and the belts and rollers, because they rub against aggregate and cement every day.

What do I send to order an electric vibrator?

A photo of the motor plate with its voltage, power and speed, and a photo of the vibrator and where it is mounted, and the part is matched by them.

Do you supply Sicoma parts?

The catalogue has Sicoma-related parts on the brand page. Send the mixer model and a photo of the part and we confirm availability.

Why does checking the load cells matter?

Because an inaccurate sensor changes the amount of cement and aggregate, so the mix comes out different from the design.

Read next